Last update = whether the hub's most recent settings delivery to that module got through — not a guarantee the module is otherwise healthy.
Unit ID
The unit ID identifies this system to your PC. Change it only if you run more
than one FCA system on the same computer, so each has a distinct identity.
—
⚠ Changing the unit ID restarts the whole system and changes its address.
Your PC will briefly see it as a brand-new device. After the restart the system moves to the
new address shown above (and a new fca.local name), so this page will
lose contact — reconnect at the new address. Unplugging and replugging the USB cable is the most
reliable way to reconnect. It does not affect your mappings or profiles.
Restarting
Restart
Restart the whole system. Your mappings and settings are kept.
Factory reset erases all settings and returns the system to the state
it left the factory in. Profiles saved on the memory card are kept.
Versions
System firmware…
Interface…
System firmware
Pick a file to validate.
Factory Reset the device while updating it — erases all stored settings on every device; the system must be reconfigured afterward.
⚠ The system is restarting onto the new firmware.
Waiting for it to come back — this can take up to a minute. Don't unplug it.
✓ Update complete
✗ Update failed
Everything stays on its current firmware.
⚠ The system's stored settings were reset. Reconfigure from scratch after it restarts.
⚠ This update changes how the system stores its settings.
Every device clears its saved settings as part of the restart. Once the system is back up,
reload your saved profile to restore your configuration.
Ready
Module
Reached
Updated
Interface
⚠ A firmware update is in progress — interface updates are paused until it finishes.
Pick a file to validate.
SD card
Loading…
File
Size
Loading…
System log files (log*.txt) can be downloaded but not overwritten or deleted while the system is running.
